Top Brivis Cooling Service – Melbourne’s South-eastern Suburbs
Expertise Meets Quality: Your Trusted Brivis Evaporative Cooling Service Specialist in Melbourne’s South-eastern Region.
Fix2QIK: With traditional meticulousness, we always respect and listen to every request of our customers. Brivis Evaporative Cooling service in Melbourne – quality since 2001.
Honest Upfront Quotes; All Jobs Guaranteed; Onsite Mobile Eftpos.
Brivis Cooling Service We Provide:
- 🔧 Diagnostics & Replacements.
- 📆 Comprehensive Maintenances.
- 📍 Swift Local Presence: Call us today for urgent services in Melbourne Southeastern Suburbs and nearby areas.
Fix2QIK: Brivis Cooling & Heating Services.
Why Opt for Fix2QIK?
- Extensive Brivis Evaporative Cooling Knowledge.
- Specialised Expertise: 20+ years in the field. All jobs warranty. Compliant certificates supplying.
- Tech Prowess: Superior Electronics Troubleshooting and HVAC-R Mastery.
- Prioritising your safety and trust: Business is properly Registered, Licensed, and appropriately Insured.
We proficient in all Brivis Cooling models, including the Advance Series, AD Series, Balaero Series, Promina Series, and Contour 6 Series.
Our expertise extending to the other leading Evaporative Cooling brands, such as: Braemar, Breezair, Bonaire, Celair, CoolBreeze and Coolair.
Brivis Cooling Models We Service:
| Series | Models |
|---|---|
| Advance Series | F36D, F56D, F76D. Advance Plus: F66DS, F46DS, F86DS. |
| AD Series | AD56B, AD56D, AD66B, AD66D, AD86, AD86D |
| Balaero Series | B50BAL, B70BAL |
| Promina Series | P36, P46, P56, P66, P76 |
| Contour 6 Series | L36, L46, L56, L66, L76 |
Appendix B: Refer to photo at the end to identify your model.
Comprehensive Brivis Cooling Services in Melbourne, VIC:
Routine Care & Servicing:
. Proactive Maintenances: Regular and Off-Season Check-ups. Schedule Servicing for your Brivis Cooling system, from Seasonal Tune-ups or Cleaning to specialised maintenance as recommended by the factory.
. Electronic System Maintenance: Enhance the longevity and efficiency of your cooler. Prioritise safety and minimise energy consumption with our specialised preventative care for electronic circuits, inclusive of Electrical Safety Testing.
Diagnostic & Replacements:
If your Brivis Evaporative Cooling system is beyond repairs or has reached its serviceable end, our trusted Air-Plumbing team is standing-by for your urgent installation.
Written warranty and all Compliant certificates will be supplied for your peace of mind.
Seasonal Cleaning includes:
. Deep cleaning all cooling pads, water carrying parts in the cooler, checks, chemically sanitise with medical grade solution,
. Check and adjustment of electrical and electronic parts to comply with the factory designed specifications.
. Visually check the adjacent roof sections for suspected damages.
Best price and workmanship
. Quotes jobs upfront on-the-spot
. 20+ Years field work experience
. Approved parts with warranty
. Mobile Eftpos, accept cards onsite
. Insured to work on Brivis Cooling
Common Brivis Cooler Symptoms Require Services:
- Won’t turn on, no power, trip RCD, blows fuse,
- Switched on ok at controller but no air flow,
- Controller has no display, dimmed, flashing,
- Remote, controller shows error code, not responding,
- Musty smelly from air vents when the fan working,
- Burning smell coming from ceiling vents,
- Water trickling on the roof,
- Sound of water keep running in the gutters,
- Fan motor blows warm air, no cooling,
- Switched on but no cold air coming from vents,
- Fan runs only low speed, can not be adjusted,
- Fan motor can only run at highest speed,
- Motor noisy, Strange noise when use, mechanical noise,
- Broken vents, Ceiling diffuser broken
- Zoning control not working, weak air blows at a Zone
- Duct component, damper stay shut or stuck open,
- Filter, water pads on the cooler are broken, and more ,
- Lack of cleaning and sanitising.
- And many more…
Appendix A: Showcase Fix2QIK’s in-depth understanding of common Brivis evaporative cooling issues and proven adeptness at servicing them.
Our expertise in field-works on Brivis Evaporative Cooling Electronics sets us apart.
For customers In Melbourne, VIC; We ensure electrical safety testing: While others may overlook this crucial step or charge extra, we include it at no additional cost. (*t&c)
Beyond Standard Servicing with Fix2QIK
Custom- Engineered Tools:
Faster and cost-effective services tailored for Brivis Cooling systems.
Unmatched Skillset:
Specialised in Brivis cooling with advanced electronics servicing expertise. No other service shop or even Brivis service center offers the same level of expertise.
Demos have been uploaded to both our YouTube and Facebook, showcasing our technical abilities and equipment designs that can help with your Brivis Cooling’s Servicing.
Reach Out Today!
Your comfy home awaits!
Fix2QIK provides Brivis Evaporative cooling services near Melbourne’s southeastern suburbs within 25km from Endeavour Hills, post code 3802.
Appendices:
Appendix A: Common Brivis Cooling Faults Encountered and Serviced.
| . Motor Issues: Fan motor doesn’t start or shows intermittent pulsating. Fan speed uncontrolled, stuck at full speed mode. Motor noisy with unusual mechanical noise. Motor overheats and stops on overload. Motor starts and stops at intervals. . Pump Problems: Pump doesn’t run or is noisy and dead stuck. Pump ejects water even when turned off. Pump fails to operate. Pump runs but does not circulate water or pads lack water. . Controller and Remote Issues: No screen display or error codes; buttons not working. Delayed or frozen commands; touch screen and touch pads unresponsive. Cooler will not run and the wall control displays fault. . Water Issues: Water trickling on the roof. Water running in gutters even when turned off. Leaks from cooler, dripping on the roof. Continuous overflow of water. Water being thrown into the area being cooled. Formation of white deposits in tank and on pads. Continually leaking water when turned off. | . Odour and Smell: Unusual odour from the duct and vents. Musty smell when the fan is working. Burning smell from ceiling vents. Unpleasant odour. . Electrical Problems: No power; trips RCD; blows fuses and circuit breakers. Electrical, electronics, and mechanical faults in solenoids, valves, control modules, and circuit boards. . Air Flow Problems: No air flow when switched on. Fan runs at low speed only, or at the highest speed only. Fan blows warm air with no cooling. Inadequate cooling. Cooler turns ON and OFF repeatedly. . Structural and Component Failures: Broken vents and ceiling diffusers. Belt slipping or wearing excessively. Noisy unit or air conditioner Zoning control failures; weak air flow in zoning vents. Stuck or shut dampers; broken filters and water pads. . Common component serviced and replaced: Vents, Ceiling Diffusser, Control module, PCB, Wall controller, Thermostat, Zone Damper and Zoning system, Pump, Ductworks, Room fan, Motor, Speed sensor, Switch, Water Sensor, Mechanical Dropper, Drainage, Water tray, Electrical connections, Electronics, Wiring, Relay, Solenoid, Circuit boards, Display. |
Appendix B: Brivis Evaporative Cooling models in Melbourne. Serviced with Fix2QIK.
Most popular Brivis Evaporative Coolers in Melbourne are displayed above. When enquiry a repair, please attach photo to id your model.
Brivis Evaporative Cooling Wall Controllers:
. Braemar. Breezair.
. Bonaire. Celair.
. CoolBreeze.
.Coolair .
- Terms and Conditions
/A/. Service, repairs guarantee: Part and labour 12 months, or per specified.* All repairs include manufacturer instruction (if any).* ESV safety compliant certificate often attracts an inspection service fee; But free of charge for any of the major replacements or repairs, please ask the technician who is accessing your job for details.* Guaranty and refund excluding: OEM recall, factory defect; Your labour and that of the third party(ies); Freights and travels; Damages caused by incorrect use, handling, storages, tampered, faulty accessories, defect and wrong testing equipment; Unlicensed fitments, Uncertified fitments, Coupled with or Connected to uncertified parts or system and spare-parts from unrecognisable sources. * Customer’s part(s) and spare-parts: Reclaiming impossible with 30 days including postage delays; Uncollected items will be disposed after 30 days since informed. Electronic servicing workshop is not available to the general public* Free repair service quotations and estimates, but fault finding and travelling and parking from or to job sites incurring a servicing fee that provided upon job booking. * Supplied parts, labours and materials in relation to the job in contract is belong to Fix2Qik and associates until payments made in full. * Different trading terms affective rental properties, please contact for more information. * Fix2Qik and associates is not to be held responsibilities for any unexpected causes, un foreseen events, act of god, management factors of the third parties. Workshop pcb and electronic components testing and repairs are reserved to established businesses only.
/B/. Single storey properties: //. Electronic services: Workshop part’s rejuvenation and restoration for Electronics modules, Circuit boards and Electronics parts are available to hvac&r tradies with appointment only. //. Single storey on-site service excluded: Tin-roofed with no Anchor or no place to set the Anchors. Service access is prevented by solar panel and the likes; Facia, Gutter and Eaves damaged that preventing the ladder’s mounting safely on the roof’s side installed the cooler /*/. Rental properties: please contact for more information prior to service booking unless previously consented.
/C/. Double Storey properties: We exclude the on-site cooling services to some double storey properties and apologise for any inconvenience: These are double storey (or more) with Terracotta tiles or Tin roof; or Eaves over 7 meters on the side of the rood installed the cooler; Service access to the cooler is obstructed by solar panels and the likes; Facia, Gutter and Eaves damaged that is preventing the ladder’s mounting safely /*/. Electronic service workshop services are available to hvac-r tradies with appointment only. /4/. Rental properties: please contact for more information prior to service booking unless previously consented.
/**/: Skill integration aka Tradies Assist: Available to assist on all RAC01 refrigerant and electrotechnology hvac&r services, to (01) ONE genuine intention plumbing tradespersons each suburb of Melbourne s-e, hourly rate ex-travel’s. We need minimum job loading or commitment requiring to contracts. Workshop in-person pcb and components testing or repairs are reserved to established businesses only.
(***): In Melbourne, VIC. AUSTRALIA: Electronics PCB Servicing is absolutely not available to: Builders, Handymen, Building service-coordinators, Auto mechanics, DIY landlords, and Non-licenced “hvac&r” related Persons; In any situation: Due to our insurance contracts and the willingness to adhere to factory specifications. There is no free electrical safety testing available to this group of tradesperson as well. This conditions apply too to the properties occupied by the tradies listed above.
Please make enquiry if in doubt. Fix2QIK.au © All right reserved
- Disclaimer:
Brand names and trademarks are belong to their respective owners, and being used here for descriptive purposes only.