Celair Evaporative Cooler Services Melbourne.

Professional Celair Cooling Technician in Melbourne.

Celair Models We Service:

We cater to all Celair models available in Melbourne, some include:

• AM 500: Classic with metal grills cover outside the cooling pads.
• Profile 500 series: 600 Watts motor. Air Output 9326 m³/hr.
• Profile 600 series: 750 Watts motor. Air Output 11810 m³/hr.
• Profile 750 series: 750 Watts motor. Air Output 13810 m³/hr.
• Profile 850 series: 750 Watts motor. Air Output 15968 m³/hr.
• Profile 750: 475 Watts motor.
• Profile 900: 600 Watts motor.
• Profile 1105: 750 Watts motor.

Contact us if the model of your model is not listed here.

Appendix A: Photos of some Celair evaporative coolers.

Melbourne’s Celair Seasonal Maintenance:

Fix2QIK’s preventative main servicing for Celair Coolers, tasks in a service included:

• Start with: Electrical Safety Testing and minor issue is rectified on site,
• Electronic control box and its connected circuits checks and adjusted,
• Motors, pump, fan, solenoid, each is checked and adjusted,
• Water distribution with passive components are checked for operation,
• Finally: Cleaning cooling pads and sump; Apply Medical grade disinfectant solution,

We ensure optimal functionality of your Celair Cooler and complement this service by providing an electrical safety compliance certificate, all at no extra cost, to prove that your job is in good hands.

During the main servicing is carrying out as described above, any plumbing defective found is discussed, or then forwarded to our trusted and insured Plumbers. Guaranty customers receive good deals from our best trader’s network that we have known for over the past 20 years. With our care you can’t go wrong!

The needs of Comprehensive Maintenance rather than just a Plumbing Cleaning:

Our knowledge proven that over 90% of Celair Cooling potential problems are stemming from the electric components; which is out of scope of the plumbers and wiring electricians, who primarily installs.

Plumbing tasks, often limited to basic cleaning and sanitising of components like pads and sumps, are within the skillset of an average handyman. However, the critical aspects of maintaining and maximising cooler performance lie in the intricate electrical components. These include electronic control boxes, pumps, motors, valves, and solenoids, which require specialised equipment and expertise. This is where an certified electronic technician’s role becomes vital.

Unlike simple plumbing tasks akin to using a garden hose or tap connection, adjusting live electrical parts demands a nuanced understanding and skillset, highlighting the need for professional electrotechnology services in maintaining these advanced cooling systems.

Fix2QIK’s approach to best Celair maintenance practise is to look after electrical and important parts then follow up with a Plumbing cleaning to properly complete preventative service. Where as air Plumbers (lacking electrotechnology’s skill) only promoting general cleaning.

Replacement & Change Over:

If your Celair Evaporative Cooling system is beyond repairs or at the end of serviceable lifespan; Our team of trusted Air Plumber is standing-by for your urgent installation, (and we’re sure this will save your time from sifting unregulated results online)!

Written warranty and Safety Compliant Certificates will be supplied for your peace of mind.

Common Celair Cooler Symptoms Requiring Our Services in Melbourne

Celair Evaporative Cooler Part: Maintenances.

Beyond Standard Servicing with Fix2QIK

Our proficient extends to many other evaporative cooling brands

Superior Evaporative Cooling Services in Melbourne

Service Areas: We offer on-site evaporative cooling services to Melbourne’s areas and suburbs within a 25km radius distance from Endeavour Hills, VIC 3802.

📞 Contact 0420 982 770 for more info

Appendices

Appendix B:
Basic Celair Evaporative Cooling Problem Solving Chart

Fault / Problem (.)	Diagnostic / Check ()	Description
1. Unit fails to start,	. Black – out, . Tripped Circuit Breaker, . Blown Fuse, . Electrical supply abnormal,	. Wait until Power restored, . Reset (Follow instruction), . Replace Fuse ( same type), . Call Service Centre,
2. Pump Fail to start,	. Mechanical problem, seized, . Pump burnt out,	. Call service centre, . Call service centre,
3. Water leaks: Overflow	. Float valve faulty, . Water distribution parts faulty, . Excess drain at Cooling Pads,	. Replace Float valve, . Adjusts or Replace part(s), . Pads problem, call service,
4. Water Droplet in air-stream	. Delivery tubes problems, . Excess pump volume, . High humid days,	. Service call, . Service call, . Fan or Auto Mode only,
5. Humidity, Wet, Damp floor,	. Inadequate venting or Exhaust, . Ambient humidity high,	. Open more: Windows, doors, . Open wider: Exhaust stale air, . Turn water Pump off,
6. Inadequate Cooling,	. Dirty filter pads, . Dried cooling pads, . Water distribution problem,	. Service call, . Service call, . Adjust Water distribution; Service call,
7. Unpleasant Odour	. Unit located near odorous source, . Cooling pads old, . Cooling pads new, . Leaves or debris	. Remove source, . Replace pads, . Using for over a week, . Service call,
8. White streaks, White formation on cooling pads,	High content mineral water supplied,	. Service call, . Call installer, . New water connection,

Appendix C:
Common Celair cooling faults encountered in Melbourne.

. Motor Issues: Fan motor doesn’t start or shows intermittent pulsating. Fan speed uncontrolled, stuck at full speed mode. Motor noisy with unusual mechanical noise. Motor overheats and stops on overload. Motor starts and stops at intervals. . Pump Problems: Pump doesn’t run or is noisy and dead stuck. Pump ejects water even when turned off. Pump fails to operate. Pump runs but does not circulate water or pads lack water. . Controller and Remote Issues: No screen display or error codes; buttons not working. Delayed or frozen commands; touch screen and touch pads unresponsive. Cooler will not run / Wall control displays fault. . Water Issues: Water trickling on the roof. Water running in gutters even when turned off. Leaks from cooler, dripping on the roof. Continuous overflow of water. Water being thrown into the area being cooled. Formation of white deposits in tank and on pads. Continually leaking water when turned off.

. Odour and Smell: Unusual odour from the duct and vents. Musty smell when the fan is working. Burning smell from ceiling vents. Unpleasant odour. . Electrical Problems: No power; trips RCD; blows fuses and circuit breakers. Electrical, electronics, and mechanical faults in solenoids, valves, control modules, and circuit boards. . Air Flow Problems: No air flow when switched on. Fan runs at low speed only, or at the highest speed only. Fan blows warm air with no cooling. Inadequate cooling. Cooler turns ON and OFF repeatedly. . Structural and Component Failures: Broken vents and ceiling diffusers. Belt slipping or wearing excessively. Noisy unit or air conditioner Zoning control failures; weak air flow in zoning vents. Stuck or shut dampers; broken filters and water pads.

Appendix A:
Celair Coolers: Some photos of models serviced in Melbourne.

Term & Condition of trading: Outlined.

1. Service Area: All services mentioned on this page are exclusively available for Melbourne south eastern and its immediate surrounding areas.
2. Pricing: Prices for services may vary based on the specific requirements, system condition, and other external factors. All prices are subject to change without prior notice.
3. Service Availability: While we strive to provide prompt service, availability may vary based on current bookings and emergencies. It’s always best to schedule in advance.
4. Warranty: Our services come with a written warranty. However, the terms and duration of each warranty or part may differ based on the service provided.
5. Safety Compliance Certificates: We issue Safety Compliance Certificates for specific services. Please inquire in advance if you think your job is requiring one.
6. Third-party Products: Any third-party products or parts used during our service are subject to their respective manufacturer’s warranty and terms. Fix2QIK will not work on & with customer’s own purchased parts, unless from the genuine suppliers or supplied from a quality HVAC-R related business that has public liability insured against product defective.
7. Cancellation: If you need to cancel a booked service, please notify us at least 24 hours in advance. Your time is truly appreciated!
8. Payment: All services must be paid for upon completion unless otherwise agreed upon in writing. All products remained property of Fix2Qik until paid in full.
9. Feedback: We value your feedback. If you have any concerns or suggestions, please let us know immediately.

For any further information or clarification on our terms and conditions, please contact us.

---

• Additional Terms and Conditions.

* /A/. Service, repairs guarantee: Part and labour 12 months, or per specified.* All repairs include manufacturer instruction (if any).* ESV safety compliant certificate often attracts an inspection service fee; But free of charge for any of the major replacements or repairs, please ask the technician who is accessing your job for details.* Guaranty and refund excluding: OEM recall, factory defect; Your labour and that of the third party(ies); Freights and travels; Damages caused by incorrect use, handling, storages, tampered, faulty accessories, defect and wrong testing equipment; Unlicensed fitments, Uncertified fitments, Coupled with or Connected to uncertified parts or system and spare-parts from unrecognisable sources. * Customer’s part(s) and spare-parts: Reclaiming impossible with 30 days including postage delays; Uncollected items will be disposed after 30 days since informed. Electronic servicing workshop is not available to the general public* Free repair service quotations and estimates, but fault finding and travelling and parking from or to job sites incurring a servicing fee that provided upon job booking. * Supplied parts, labours and materials in relation to the job in contract is belong to Fix2Qik and associates until payments made in full. * Different trading terms affective rental properties, please contact for more information. * Fix2Qik and associates is not to be held responsibilities for any unexpected causes, un foreseen events, act of god, management factors of the third parties. Workshop pcb and electronic components testing and repairs are reserved to established businesses only.

/B/. Single storey properties: /*/. Electronic services: Workshop part’s rejuvenation and restoration for Electronics modules, Circuit boards and Electronics parts are available to hvac&r tradies with appointment only. /*/. Single storey on-site service excluded: Tin-roofed with no Anchor or no place to set the Anchors. Service access is prevented by solar panel and the likes; Facia, Gutter and Eaves damaged that preventing the ladder’s mounting safely on the roof’s side installed the cooler /*/. Rental properties: please contact for more information prior to service booking unless previously consented.

/C/. Double Storey properties: We exclude the on-site cooling services to some double storey properties and apologise for any inconvenience: These are double storey (or more) with Terracotta tiles or Tin roof; or Eaves over 7 meters on the side of the rood installed the cooler; Service access to the cooler is obstructed by solar panels and the likes; Facia, Gutter and Eaves damaged that is preventing the ladder’s mounting safely /*/. Electronic service workshop services are available to hvac-r tradies with appointment only. /4/. Rental properties: please contact for more information prior to service booking unless previously consented.

/**/: Skill integration aka Tradies Assist: Available to assist on all RAC01 refrigerant and electrotechnology hvac&r services, to (01) ONE genuine intention plumbing tradespersons each suburb of Melbourne s-e, hourly rate ex-travel’s. We need minimum job loading or commitment requiring to contracts. Workshop in-person pcb and components testing or repairs are reserved to established businesses only.

(***): In Melbourne, VIC. AUSTRALIA: Electronics PCB Servicing is not available to: Builders, Handymen, Service-coordinators, Auto mechanics and Non-licenced “hvac&r” related Persons; In any situation: Due to our insurance contracts and the willingness to adhere to factory specifications. Therefore no electrical safety testing available to this group of tradesperson as well.

Please make enquiry if in doubt. Fix2QIK.au © All right reserved 

---

• Disclaimer:

Brand names and trademarks are belong to their respective owners, and being used here for descriptive purposes only.

---

. Some suburbs we do onsite servicing:

Aspendale Gardens, Bayswater, Beaconsfield, Belgrave, Berwick, Blackburn, Cardinia, Carnegie, Carrum Downs, Chadstone, Clayton, Cranbourne, Dandenong, Doveton, Endeavour Hills, Ferntree Gully, Forest Hill, Glen Waverley, Hallam, Hampton Park, Keysborough, Knoxfield, Lynbrook, Lyndhurst, Moorabbin, Mount Waverley, Mulgrave, Narre Warren, Noble Park, Notting Hill, Oakleigh, Officer, Pakenham, Rowville, Surrey Hills, Sandhurst, Scoresby, Springvale, Vermont, Wantirna, Waterways, Wheelers Hill, and near Melbourne south eastern areas or suburbs approximately 25km radius from Endeavour Hills, 3802.

---